Nylon Membrane Pleated Cartridge Filters

1. With absolutely rated 2. Only two materials of construction 3. Remove 0.2um 4. Good chemical,high temperature-resistance

Features & Benefits

A.     Hydrophilic Nylon 6 membrane pleated cartridges with absolutely ratedB.      Cartridges consist of a Nylon 6 membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.C.     Superior flow rate and efficiency maximizing performanceD.     Non-fiber releasing according to pharmaceutics and food industry requirements.E.      Processing better performance of high temperature-resistance,acid and base resistance.F.      Remove particles and microorganisms greater than 0.2µm from gas and liquidG.     Cartridges 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performanceH.     Flushed with ultrapure water to remove any manufacturing debrisI.        No adhesive,thermal bonded manufacturing without adhesives

Applications

A.     Final filtration for bacteria removal in reverse osmosis,deionization and other ultrapure water systemsB.      Particle filtration for ultrapure chemicalsC.     Semiconductor,Electronic industry ultrapure water systemD.     Food and beverage,drinking water treatmentE.      Plating solutionsF.      Pharmaceuticals

Material of construction

A.     Media:Hydrophilic NylonB.      Support layer:PolypropyleneC.     Core/Cage/End adaptor:PolypropyleneD.     Sealing method:Thermal bonding

Recommended Operating Conditions

A.     Max.Differential pressure:B.      Forward-70psi (4.8bar) at 25°CC.     Forward-40psi (2.7bar) at 25°CD.     Filters change recommended at 1.5barE.      Max.Operating temperature:80°CF.      Sterilization:20times,30Minutes cycles at 121°C

Cartridge Dimensions

A.     Filtration Area:0.65m2  each 10" lengthB.      Outer Diameter:69mmC.     Nominal Length:5" ,10" ,20" ,30" ,40" etcD.     Micron Rating:0.1,0.2,0.45,0.65µm

Recommended Integrity Test

Pore Size	Diffusional Flow cc/min@Test Pressure Per 10″length
0.1µm	≤55@48psig(3.3bar)
0.2µm	≤55@35psig(2.4bar)
0.45µm	≤55@20psig(1.4bar)
0.65µm	≤55@15psig(1.0bar)

Ordering Guide

Model Nylon	Micron Rating	End Adaptor	Seal	Length
N6-Nylon pleated type	0.10:0.1µm 0.20:0.2µm 0.45:0.45µm 0.65:0.65µm	Code 0-DOE Double open end 7-226/Fin 8-222/Fin 3-222/Flat closed 2-226/Flat closed F-215/Flat closed S-O-ring insert/Flat closed	E-EPDM N-Buna S-Silicone V-Viton T-Teflon Encapsulated viton	5:5″ 10:10″ 20:20″ 30:30″ 40:40″

Nylon Membrane Pleated Cartridge Filters