PTFE Membrane Pleated Cartridge Filter

1. With absolutely rated 2. Only two materials of construction 3. Remove 0.2um 4. Good chemical,high temperature-resistance

Features & Benefits

A.     Hydrophilic PTFE membrane pleated cartridges with absolutely ratedB.      Cartridges consist of a PTFE membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.C.     Superior flow rate and efficiency maximizing performanceD.     Extensive applicability.E.      Extremely good chemical,high temperature-resistanceF.      Good oxidation-resistance,high temperature-resistanceG.     Remove particles and microorganisms greater than 0.2µm from gas and liquidH.     Cartridges 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performanceI.        Flushed with ultrapure water to remove any manufacturing debrisJ.       No adhesive,thermal bonded manufacturing without adhesives

Applications

A.     Solvent filtrationB.      Sterile vent filters for storage tanksC.     Coating-solvent in the electronic industryD.     Filtration of non-aqueous chemicalsE.      Filtration of acid baths for the production of semiconductorsF.      Compressed GasG.     Pharmaceutical and intermediate Solvents

Material of construction

A.     Media:Hydrophibic PTFEB.      Support layer:PolypropyleneC.     Core/Cage/End adaptor:PolypropyleneD.     Sealing method:Thermal bonding

Recommended Operating Conditions

A.     Max.Differential pressure:B.      Forward-70psi (4.8bar) at 25°CC.     Forward-40psi (2.7bar) at 25°CD.     Filters change recommended at 1.5barE.      Max.Operating temperature:95°C

Cartridge Dimensions

A.     Filtration Area:0.75m2 each 10″lengthB.      Outer Diameter:69mmC.     Nominal Length:5″,10″,20″,30″,40″etcD.     Micron Rating:0.1,0.2,0.45µm

Ordering Guide

Model PTFE	Micron Rating	End Adaptor	Seal	Length
PTFE-PTFE pleated type	0.10:0.1µm 0.20:0.2µm 0.45:0.45µm	Code 0-DOE Double open end 7-226/Fin 8-222/Fin 3-222/Flat closed 2-226/Flat closed F-215/Flat closed S-O-ring insert/Flat closed	E-EPDM N-Buna S-Silicone V-Viton T-Teflon Encapsulated viton	5:5″ 10:10″ 20:20″ 30:30″ 40:40″

Integrity Test Values

Micron Pore Size	100%IPA Bubble Point
0.1µm	22psig(1.5bar)
0.2µm	15psig(1.0bar)
0.45µm	9psig(0.6bar)

PTFE Membrane Pleated Cartridge Filter